AQUA HOT 100DE (AHE-100-DE1) 2-in-1 heating system, 3.458,99 €

Description

How does the AQUA-HOT 100D work?

In them, heat is transferred by circulating a fluid (glycol solution) through a closed system of pipes to heat exchangers that carry the heated air into the living space. The pipe coils through which the water flows wrap around the boiler to transport the hot water to the taps and appliances in the camper.

The heating, hot water and fuel supply connections are easily accessible from the rear of the tank, making installation quick and easy. By using the RV-C system, the entire appliance control can also be integrated into the camper's general control panel.

The system heats the glycol solution that is stored in the Aqua-Hot boiler tank. This liquid solution must reach operating temperature (approximately 80°C) before the Aqua-Hot will provide interior heating or hot water; this can take 10 to 15 minutes after the diesel burner or electric heating element is switched on.

Key features:

Diesel-powered and powered by 12 volts for off-grid applications.
Available with a 230 V electric heating element.
Aqua-Hot 2-in-1 design provides significant space savings.
Ready for high altitudes up to 5,000 m
Low emission, the new low-emission Aqua-Hot systems emit no smoke or odour. Good for you, your neighbours and the environment.
A single, self-contained unit, it provides heating for living spaces using heat exchangers with the ability to deliver continuously hot water at 38-40°C at a rate of 3.5 l/min.
Quick installation: heating, domestic water and fuel supply/outlet ports are located at the rear of the tank for easy access to connections.
RV-C Open Source: Easy integration into the camper's control panel.

Technical specifications:

Energy source: diesel fuel
Suitable for altitudes up to 5,000 m
Power supply: 12V DC
Max. heating power: 6.5 kW
Current consumption: (max.) 7 A
Current consumption (average): 5 A
Hot water flow rate: 3.5 l/min (40 °C)
Glycol solution tank: 6.8 litres
Glycol solution tank (max. temp.): +82 °C
Heating element 230 V: 1x 1.5 kW
Fuel consumption: 0.22-0.45 l/h
Time to reach operating temperature: 15 min.
Heating zones: 3
Pipes: Ø 19 mm
Weight (full): 26.7 kg

Dimensions:

Length: 448 mm
Width: 190 mm
Height: 292 mm
Weight: 20.4 kg

Shipping weight:	27,00 kg
Dimensions ( Length × Width × Height ):	45,00 × 29,50 × 19,00 cm

Floor Heating Kit 100 DE (PXE-100-001)

Price on request