The Autoterm Air 4D (formerly Planar 44D) in 12V or 24V with a heating power of 4KW ensures rapid heating of the interior even in icy temperatures.
It is suitable for larger vehicles (e.g. Mercedes Sprinter) and boats. According to the manufacturer, the optimum room size in which the Autoterm Air 4D works most efficiently is 40m³.
The set includes all parts required for commissioning, such as the exhaust pipe and fuel pump. Depending on the installation location and intended use, additional accessories may be required. A detailed list of the scope of delivery and the additionally recommended parts can be found below.
The hole pattern corresponds to that of the manufacturers Webasto or Eberspächer, so that replacement can be carried out without any problems. The warm air outlet has a diameter of 100mm.
If required, a warm air hose with a diameter of 90mm can be connected with a reducer. After at least 1m, it can be reduced to 75mm in the further course. The exhaust pipe is based on 24mm.
The Autoterm Air 4D 4KW 12V or 24V has, like all parking heaters of the Autoterm brand, an ECE approval mark, so that it can be installed without registration.
Scope of delivery:
- Heater 12V or 24V
- Metering pump
- Rubber holder f. metering pump
- Fuel line 5,5m
- Fuel line connector
- Fuel tank intake pipe
- Exhaust corrugated pipe metal 1m
- Exhaust silencer
- End piece f. exhaust pipe
- Heat insulation f. exhaust pipe
- Air intake hose with integrated silencer
- Cable f. heater, metering pump, control panel
- Screws, nuts, clamps
- Installation and operating instructions in German
Voltage: 12V or 24V
Fuel type: Diesel
Maximum heat output: 4 KW
Minimum heat output: 1 kW
Maximum air heating efficiency: 120 m³/h
Minimum efficiency of the air heating: 70 m³/h
Maximum fuel consumption in modes: 0.514 l/h
Minimum fuel consumption in modes: 0.12 l/h
Maximum power in modes: 62 W
Minimum power in modes: 10W